USA & Canada · Licensed Engineering Review
Some projects do not fit the standard permit checklist. A fire marshal asks for an emergency responder radio system. A utility wants stamped drawings for a skid-mounted switchgear building. A telecom carrier needs a rooftop installation certified. Reviewers for these projects often have no template, so they ask for an engineer’s seal.
Licensed PE Stamping provides specialty systems PE stamping services across the USA and Canada. Our licensed engineers review the design, check it against the codes and standards that apply, and deliver sealed documents ready for the authority having jurisdiction (AHJ) and utility.
A specialty system is any installation that combines engineering disciplines, uses non-standard equipment, or falls under codes beyond the usual building set.
These projects often need electrical, structural and sometimes mechanical review together. A single missing piece can hold up approval for the whole system.a
Explore the engineering documentation your system may need for AHJ, utility or owner review.
Charging stations look simple on the outside, but plan reviewers and utilities check several things behind them: available service capacity, load management, equipment ratings and the structural support for pedestals and canopies.
We support EV charging projects with:
Many fire codes require buildings to provide reliable radio coverage for first responders. When coverage inside the building is weak, the building owner usually has to install a distributed antenna system (DAS) or bi-directional amplifier (BDA), sometimes called an emergency responder radio coverage system.
Fire departments typically want to see:
Telecom installations add loads to towers, monopoles and rooftops, and carriers and landlords want proof the structure can handle them.
Our engineers support:
An E-house is a prefabricated building that holds switchgear, controls and related equipment, built off site and shipped complete. The permit still needs documents showing it is safe where it sits.
We support:
Containerized and skid-mounted equipment moves a lot of work into the factory, but approval depends on documents that match the final installation.
We can prepare or review:
Some jurisdictions and customers want an engineer to certify custom control panels and industrial equipment installations.
We review:
We ask for the right information at the start so these issues come up during review, not after submission.
Tell us what is being installed, where, and which authority is reviewing it. Send any drawings, equipment data and comment letters to info@licensedpestamping.com.
Within 12 hours you receive the scope, price and timeline, including which disciplines are involved.
Our engineers review electrical, structural and related details together so the package is consistent.
Signed and sealed drawings and calculations are delivered digitally. If the AHJ or utility comments, we help you respond.
Equipment data, drawings and the reviewer’s requirements help us define the disciplines involved and the scope of the engineering package. Tell us what you are installing and who is reviewing it. You will receive a scope, price and timeline within 12 hours.
We provide specialty systems PE stamping services for projects in the United States and Canada.
Each project is assigned to an engineer licensed in the state, province or territory where it will be built, since the seal is only valid in that jurisdiction.
Because specialty systems often fall under local amendments, we confirm the adopted codes at the start of every project.
A distributed antenna system or bi-directional amplifier boosts radio signals inside a building so first responders can communicate. Many fire codes require one when coverage is below the required level.
It depends on the size and the jurisdiction. Larger commercial installations, service upgrades and canopy structures commonly need stamped drawings, while a single residential charger often does not.
An E-house is a prefabricated building that houses electrical equipment such as switchgear and controls. It is built off site and delivered to the project.
We can review the installation, anchorage and electrical connections for the site. Whether we can certify the equipment itself depends on the equipment and the authority’s requirements, so ask us at the quote stage.
Yes, in most cases. Added antennas and equipment change the loads on the tower or roof, and carriers and landlords generally require analysis.
Simple installations can take a few business days. Multi-discipline systems take longer. Your quote includes an estimated timeline.
Yes, through engineers licensed as P.Eng. in the relevant province.
Send us the comments. We will update the documents where needed and help you resubmit.
Send your project details for a clear quote within 12 hours.
Professional engineering review and certification. Supporting projects across the USA and Canada.
© 2026 Licensed PE Stamping. All rights reserved.